Biomass Wood Chipper
Wide adaptability of raw materials: Professional processing of various types of forest residues, straw and other diversified biomass raw materials, laying the foundation for large-scale utilization.
Discharge standardization: Produce uniform and regular high-quality wood chips to meet the precise requirements of industrial applications such as biomass power generation and artificial board manufacturing.
High homework efficiency: With high power and continuous feeding design, high-intensity and large-scale processing can be achieved, significantly improving economic benefits.
Promoting industrialization: It is a key link connecting agricultural and forestry waste with green energy and environmental materials industries, and promoting resource recycling.
Biomass Wood Chipper is mainly used to cut biomass raw materials such as wood and branches into sheets of certain specifications. It is an important equipment in the production of particleboard, fiberboard, and biomass power generation. Cut the leftover wood from logging/processing, including logs, small diameter logs, twigs, and bark, as well as non wood fiber stems such as bamboo, cotton stalks, sugarcane, and reeds into standardized pieces. The output is mainly used as a raw material for the preparation of particleboard, fiberboard, and non wood based panels, as well as a basic raw material for pulp and paper production. It can also be used as a fuel for biomass power generation.
The biomass slicer mainly cuts raw materials into pieces through high-speed rotating blades. Drum type cutting machine: It is mentioned that its core cutting mechanism is a rotating drum (knife roller), on which several flying knives are installed. During work, the wood is fed into the feeding port, pressed by the upper and lower feeding rollers, and pushed towards the knife roller. The high-speed rotating flying knife cuts the wood into pieces, and the qualified pieces fall through the mesh holes outside the drum and are discharged. The oversized pieces will remain in the machine and be cut again. This type of machine usually consists of a machine body, knife rollers, upper and lower feeding mechanisms, hydraulic systems, etc. The hydraulic system can easily start and stop the cover to replace blades, or lift the upper feeding roller for maintenance.
Operation and Maintenance
Safety first: Before use, check the installation and fastening of all components to ensure the correct rotation direction. It is strictly prohibited to crush flammable and explosive materials.
Uniform feeding: Maintain uniform feeding to ensure crushing quality and normal production, while paying attention to avoiding motor overload.
Regular maintenance: Pay attention to checking the wear and tear of vulnerable parts (such as flying knives and bottom knives), and replace them in a timely manner if the wear is severe; Maintain good lubrication.
Technical Specifications
Model | GX216 | GX217 | GX218 |
Diameter of rollers | 650 | 650 | 650 |
Knife qty （pcs） | 2-3 | 2-3 | 3-5 |
Size（mm） | 230*500 | 240*680 | 300*680 |
Rotary speed of roller（r/min） | 590 | 590 | 590 |
Feeding speed（m/min） | 38 | 38 | 38 |
Maxi diameter of logs（mm） | 200 | 200 | 300 |
Wood chips size（mm） | 20-35 | 20-35 | 20-35 |
Capacity（t/h） | 3-5 | 5-7 | 7-10 |
Main motor power | 55 | 75 | 110 |
Weight（t） | 4.1 | 5.2 | 7.1 |
Size（mm） | 1980*1950*1250 | 2300*2150*1500 | 2500*2150*1600 |
